Description
Novastar MCTRL4K LED Controller
Product type: LED display controller
Supply voltage: AC 100-240V, 50 / 60Hz
Input resolution: up to 4096×2160 @ 60Hz
Load capacity: 8.8 million pixels
Output interface: 16 network ports / fiber × 4
Audio interface: HDMI input
Video interface: DP1.2 × 1, HDMI2.0 × 1, Dual DVI × 2
Control method: USB / TCP / IP
Video format: RGB, YCrCb4: 4: 4, YCrCb4: 2: 2, YCrCb4: 2: 0
Light detection head: ——
Video source bit depth: 8/10 / 12bit
Certification: CE, ROHS, FCC, UL & CUL, EAC, CB, IC
Novastar MCTRL4K is a 4K × 2K independent led controller sending box with a single maximum load of 4096×2160 @ 60Hz. Users can customize the resolution within this range according to their needs to meet the on-site configuration requirements for ultra-long and large led screen.
In the independent sending mode, Novastar MCTRL4K can be used as two independent box, and the pictures of the two input sources can be displayed. Supports HDR function, used with A8s / A10s Plus Novastar receiving card,greatly enhance the picture quality of the display and make the picture colors more realistic and vivid.
Novastar MCTRL4K is mainly used in concerts, live broadcast evenings, monitoring, stadiums and sports screen.
Novastar MCTRL4K Features:
Support HDR function, including HDR10 and HLG standards.
Supports 2D-DVI input sources with maximum load of 8.3 million.
Supports 16-channel Neutrik Gigabit Ethernet ports and 4 line 10G optical fiber ports.
Supports one DP 1.2 and one HDMI 2.0 input source, with maximum load of 8.8 million.
Support video source bit depth 8Bit / 10Bit / 12Bit.
When dual-link DVI input is supported,two working modes: synchronous stitching and independent sending.
The input supports fractional frame rate, and realizes 23.98 / 29.97 / 47.95 / 59.94 / 71.93 / 119.88Hz adaptive.
When the number of input source bits is 10bit / 12bit, it supports RGB independent gamma adjustment.
Supports large resolution settings via NVIDIA computer graphics.
Support Novastar new generation of point-by-point correction technology.
With 3D emitter EMT200 and 3D glasses, it supports 3D function.
Support low latency, the delay is less than 1ms.
Supports multiple devices for unified control.
Support web configure.
Novastar LED Display Controller MCTRL R5
Product type: LED display controller
Input resolution: up to 4Kx1K @ 60HZ
Power supply voltage: AC 100-240V ~ 50 / 60Hz
Load capacity: 4.15 million
Control method: USB, ETHERNET, GENLOCK
Audio interface: HDMI
Video interface: HDMI / DVI / 6G-SDI
Output interface: 8 Neutrik Gigabit Ethernet port outputs
Video format:-
Video source bit depth:-
Light detection head:-
Certification: FCC, RoHS, UL & CUL, IC, EMC, LVD, CB
Novastar MCTRL R5 is a LED sending box to support the rotation function,which maximum load of a single sending box is 3840×1080 @ 60Hz. Users can customize the resolution according to their needs within this range to meet the on-site configuration of large led screen.
Novastar sending box MCTRL R5 combine with Novastar receiving card A8s / A10s Plus. The SmartLCT can be freely equipped with led screen, allowing to rotate at any angle, increasing the diversity of LED screens and bringing a new visual experience to users. Novastar MCTRL R5 is mainly used in concerts, stage,event etc.
Support 8 Gigabit Ethernet ports and 2 optical fiber ports.
Support display rotation at any angle.
Complete input interface, including one line 6G-SDI, one line dual-link DVI, and one line HDMI1.4.
Through white balance calibration and color gamut matching, ensure the true color reproduction.
No computer is required.
Adopting innovative architecture to achieve intelligent configuration, greatly reducing stage performance.
With Novastar G4 engine, the picture is stable without flickering, no scanning lines, delicate images.
Manually adjust display brightness, convenient and quick.
Firmware upgrade via USB interface on the front panel.
Support Nova’s new generation of point-by-point calibration technology.
Multiple units can be controlled.
Novastar MCTRL1600 LED display controller
Product type: LED display controller
Load capacity: 9.2 million pixels
Input resolution: support 4096×2160 @ 60Hz, maximum support 7680×1080 @ 60Hz (DP)
Video source bit depth: 8/10 / 12bit
Control method: USB / TCP / IP
Output interface: 16 network ports / fiber × 4
Video interface: DP1.2 × 1, 4 x DVI (DUAL DVI & SINGLE DVI switch)
audio port : None
Supply voltage: AC 100-240V, 50 / 60Hz
Video format: RGB, YCrCb4: 4: 4, YCrCb4: 2: 2, YCrCb4: 2: 0
Light detection head:None
Certification:None
Novastar MCTRL1600 is a 4K*2K independent master control sending controller box. A single sending box supports 4096 × 2160 @ 60Hz. users can customize the resolution according to their needs to meet their requirements for ultra-long and large led screens.
Novastar MCTRL1600 supports two working modes: sending card and photoelectric conversion mode, providing a flexible solution.
In sending card mode, MCTRL1600 Novastar sending box can be used as two (DUAL LINK DVI) or four (SINGLE LINK DVI) independent master controllers.
When the number of input source bits is 10bit / 12bit, it supports RGB independent gamma adjustment, which effectively controls the problems of low gray unevenness and white balance drift of led display, and improves the led display quality.
Novastar MCTRL1600 combine with Novastar EMT200 3D emitter and 3D glasses to achieve 3D display effect.
Support multiple equipment for unified control.
Supports large resolution settings via NVIDIA computer graphics.
Support Nova’s new generation of fast and efficient point-by-point calibration.
Novastar MCTRL1600 is a stable, reliable and powerful led sending box,which is committed to providing users with an extraordinary visual experience. It is mainly used for rental and fixed installation, such as concerts, live broadcast, monitoring,stadiums and sports centers.
